There are numerous reasons for keeping your kitchen appliances in good condition and using professional-grease trap cleaning. These high-powered machines are needed to remove deposits that can pose a potential fire hazard. However, some of these products leave behind oil residue that is difficult to remove.
Oil residue may be present when you try to clean grease traps yourself. Many users are left scratching their heads wondering how they can get it out. The answer lies in the fact that Grease Trap Perth should never be cleaned by hand.
Never use your hands to clean the trap with anything other than a detergent sponge. Avoid using water or any other type of cleanser because this will damage the traps and cause them to lose their seal. Invest in a small, handheld squeegee or a plastic brush with a non-wax side.
Apply the detergent sponge and spread it over the traps. You want to make sure that you do not completely saturate them as this could result in overspray. If you do wet the traps completely, you will have no choice but to discard the mixture.
Take the detergent sponge and apply it evenly to the traps. You should use as much of the solution as necessary to thoroughly clean the trap. Use the squeegee in a circular motion to get rid of the excess. When it comes time to use the trap again, you will find that you did not have to keep scrubbing at it.
Next, use a clean rag to wipe down the grease trap. Use a slightly damp rag because the residue left from the cleaning agent will cause the traps to retain water. Make sure that you avoid touching the traps themselves with the towel. You may end up transferring the residue to the traps by accident. Once you have rinsed the grease trap, you can now use it. Use it until it has become completely saturated. If you have used too much solution, simply repeat the same steps that you had already done in order to fully dry the trap.
When your grease trap is completely dry, you can now store it away. It will still need to be cleaned before it can be stored and that is why you decided to hire professionals. Just remember to clean the trap at least once every month so that it will last as long as possible.
It is also important to get the cleaning done on a regular basis in order to get the best results. When it comes to grease traps, the longer you wait, the worse it will look. On top of that, the cleaners you use may not be able to remove all of the deposit.
If you would like to save money and not have to go through the hassle of hiring a professional grease trap cleaning company, consider doing it yourself. You can easily make your own trap cleaners by mixing one-quarter vinegar and one-fourth white vinegar. Mixing both ingredients in a spray bottle will give you the cleaning solution you need.
Get a handful of the solution and spray it onto the traps in a wide sweeping motion. Allow it to sit for about five minutes before scrubbing it off. You will find that this will leave your traps looking brand new.
While the benefits of using low-cost trap cleaners may not seem all that important, there are many great advantages that you will not be able to experience if you choose to mess around with those cleaners that you find at the store. By making your own cleaners, you will save money and ensure that you are getting the best results. You can easily do this in your own home by reading up on high-quality products that are available online.